Philips DVD737 manual Digital Output Lpcm Output

DVD Menu Options

Digital Output LPCM Output

i s h

Set the Digital output according to your optional audio equipment connection.

1Press 34 to highlight ‘Digital Output’.

2Enter its submenu by pressing 2.

3Move the cursor by pressing 34 to highlight the selected item.

➜All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.

➜PCM Only: Only if your receiver is not capable of decoding multi-channel audio.

4Press OK, then press 1 to return to Audio Setup Page.

Helpful Hint:

–If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.

If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.

1Press 34 to highlight ‘LPCM Output’.

2Enter its submenu by pressing 2.

3Move the cursor by pressing 34 to highlight the selected item.

➜48kHz: Playback a disc recorded at the sampling rate of 48kHz.

➜96kHz: Playback a disc recorded at the sampling rate of 96kHz.

4Press OK, then press 1 to return to Audio Setup Page.

E n g l

25