MULTI-CHANNEL Sound for Home Theatre

1/DVD-930/935-ENGLISH 10-08-1999 09:55 Pagina 8

ENGLISH

STANDARD CONNECTIONS

For multichannel sound, your player provides both digital and analog audio outputs.

DIGITAL (MPEG 2 MULTICHANNEL OR DOLBY DIGITAL™) MULTICHANNEL SOUND

For this, which provides the highest possible sound quality, you need a digital multichannel A/V receiver. Connect the player’s digital audio output to the corresponding input on the receiver using the optional digital audio cable. In this case, do not use the player’s audio Left and Right outputs.

You will need to activate the digital output of the player (See Settings p. 16).

The audio format of the digital output is dependent on the audio format of the selected audio stream.

Make sure that the selected audio stream matches the capabilities of the receiver connected to the digital output.

DIGITAL AUDIO

CABLE

ANALOG (DOLBY PRO LOGIC™) MULTICHANNEL SOUND

If your TV set has a Dolby Pro Logic™ decoder, you simply hook up the player to the TV using the Euroconnector, S-Video and audio, or Video (CVBS) and audio connections p. 7. If not, you need to make the Euroconnector, S-Video, or Video (CVBS) connection to the TV p. 7, and connect the player’s audio Left and Right outputs to the corresponding inputs on a Dolby Pro Logic™ Audio/Video receiver, using the cable supplied.

For speaker connections, follow the instructions given in the TV set or A/V receiver user manual.

NOTE

–You cannot use the RF antenna connection for home theatre.

–If the audio format of the digital output does not match the capabilities of your receiver, the sound will be muted.

DIGITAL AUDIO (STEREO) SOUND CONNECTION

For this connection, which produces the highest possible stereo	corresponding input on the amplifier. In this case, do not use
sound quality, you need an audio amplifier with digital audio	the player’s audio Left and Right outputs.
input. Connect the player’s digital audio output to the

NTSC/PAL SETTING

Use this switch to set the player menu output according to the	NOTE
TV-set used.	– The video output standard for Video CD and DVD-Video
	discs most corresponds to the disc being played.

HEADPHONES

To listen to the player sound directly, plug the headphone jack into the headphone socket on the front of the player. Adjust the volume as desired with the headphone volume control.