PLAY
OPEN/ CLOSE | PAUSE |
STAND BY
DIGITAL OUT |
PHONES
Turning On the power
1Switch on the TV and select the video in jack channel for your DVD- Video player.
2Press
➤ The player display lights , and the ‘Initial Setup Screen’ appears.
The ‘Initial Setup’ will only appear the very first time you turn on the player. In ‘Initial Setup’, you may have to set your personal preferences for some of the player’s most relevant items. See ‘Initial Setup’.
Initial Setup
Menu language
English
Español
Français
Português
Chinese
Malay
Initial Setup
General
In ‘Initial Setup’ you may have to set your preferences for some of the player features.
Manual Operation
After switching on the player for the very first time, the ‘Initial Setup Screen’ will appear.
The menu for the first item to be set is displayed and the first option is highlighted.
●Use the w v keys to go through the options in the menu. The icon of the selected option will be highlighted.
●Use OK to confirm your selection and to go to the next menu.
Automatic setting:
When settings will be taken over from your TV or Home Cinema system, the message ‘Auto configuring in process’ will appear.
Menus for which no settings are available will be displayed.They have to be set manually.
Note: Preferences have to be set in the order in which the item menus will appear on the screen.
The ‘Initial Setup’ screen will only disappear after the settings for the last item have been confirmed.
If any keys other than w v or OK are pressed, 
will appear on the screen.
If the player is switched off while setting personal preferences, all preferences have to be set again after switching the player on again.