Philips DVD950/05 Black level shift Ntsc only, Video shift, Colour settings, Personal colour

-Black level shift (NTSC only)

Adapts the colour dynamics to obtain richer contrasts. Select ON or OFF.

- Video shift

Factory setting is such that the video will be centered on your screen. Use this setting to personalize the position of the picture on your TV by scrolling it to the left or right.

-Colour settings

You can select one of five predefined sets of colour settings and one set (Personal) which you can define yourself.

-Personal colour

Allows you to fine-tune the selected colour settings saturation, brightness and contrast.

Sound

-Digital output

Factory setting ON means that both coaxial and optical outputs are switched on. If you are not connecting equipment with a digital input, change the setting to OFF.

If your equipment doesn't include a digital multi channel decoder, set the digital output to PCM (Pulse Code Modulation). Both coaxial and optical outputs are then switched on. (See appendix)

-Analog output

Select Stereo, Dolby Surround, 3D Sound or Multi Channel. (See appendix)

-Night Mode

Optimizes the dynamics of the sound with low volume playback.

-Speaker settings

Allows you to select speaker settings, volume balance and delay time and to test the speaker settings.

Speaker settings are only active on the Analog Multi Channel Output. (See appendix)

-Karaoke vocal

Put this setting to ON only when a multi channel karaoke DVD is being played.The karaoke channels on the disc will then be mixed to a normal stereo sound.

Language

Select the required Menu,Audio and Subtitle language. See ‘Virgin Mode’. Audio language and Subtitle language can also be adapted via the Menu bar on the screen.

English

PREPARATION 21