Philips DVD700/004, DVD7X0 manual FTS Favourite Track Selection

PLAYING AN AUDIO CD

•To repeat the entire disc, press REPEAT a second time for about 1 second;

➜ REPEAT appears on the display.

•To exit Repeat mode, press REPEAT a third time for about 1 second.

A-B REPEAT

To repeat or loop a sequence:

•Press A-B REPEAT briefly at your chosen starting point;

➜A appears on the player display.

•Press A-B REPEAT briefly again at your chosen end point;

➜A-Bappears on the display, and the repeat sequence begins.

•To exit the sequence, press A-B REPEAT briefly again.

SCAN

Plays the first 10 seconds of each title on the disc.

•Press SCAN for about 1 second.

•To continue play at your chosen title, press SCAN again for about 1 second or press 2.

FTS (FAVOURITE TRACK SELECTION)

NOTE

-FTS Favourite Track Selections are compiled and played using the OSD: ensure that the TV is on.

Playing an FTS program

If Auto FTS is set to on, play of the FTS program starts imme- diately. If Auto FTS is off:

1Insert a disc and go to Stop mode.

2Press l or r to start compiling FTS programs.

3If available the excisting FTS program appears.

4Follow instructions under “To exclude tracks” or “To select tracks”.

To turn Auto FTS on and off, see Settings, p. 20

Compiling an FTS program

FTS programs can be compiled by selecting the tracks you want to play (“Track Selection”) or by excluding the tracks you don’t want to play (“Excluding Tracks”)

To exclude Tracks:

1Insert a disc and go to Stop mode.

2Press l.

3Use l or r to move to the first track number you want to exclude.

4Press o.

5Repeat steps 3 and 4 to exclude further track numbers in

the same way. If you change your mind, you can re-include any track number by moving back to it and pressing b.

6To clear your whole selection and start again, press 9.

						audio CD			exclude tracks
1	2	3	4	5	6	7	8	9	10 11 12 13 14		2
											play
						7
									exclude
	2 play selection							clear selection		9

english 19