BEFORE REQUESTING SERVICE
DIAGNOSTIC PROGRAM
If the fault persists, you can run the Diagnostic Program in the player.
INSTRUCTIONS:
1Switch the player off.
2Hold both OPEN/CLOSE and ; pressed and switch on the player.
➜‘BUSY’ appears on the display together with a counter. The counter indicates the termination of the test when it reaches zero.
➜After a few minutes, ‘BUSY’ changes to ‘ERROR’ or ‘PASS’.
3Swith off the player to exit the Diagnostic Program.
4‘ERROR’ indicates that your player needs repair. Contact your dealer or the Philips Consumer Information Center (CIC).
5‘PASS’ indicates that the Diagnostic Program has found no fault. In this case, the malfunction may be due to misinter- pretation of the operating intructions, or an unsuitable disc, or incorrect connections. If you still cannot solve the pro- blem, contact your dealer or the Philips CIC.
6You will find the phone number of the Philips CIC in your Warranty Booklet.