Progressive Scan Y PR/CR PB/CB connection only

–Progressive Scan (Y PR/CR PB/CB connection only)

Progressive Scan Video provides the highest quality pictures with less flickering.

If you are using the Component Video jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off.

If you are using the Component Video jacks for connection to a video display that is compatible with a progressive scan signal, set Progressive Scan to On.

Notes:

–Progressive Scan only works when the VIDEO OUTPUT switch on the rear panel is set to COMPONENT.

–Make sure the TV’s Sync Mode setting is correct. For example, on some Philips TVs, set “SYNC MODE” to “SYNC MODE 2.” An incorrect Sync Mode setting will cause the picture to shift off-center on the TV screen while using Progressive Scan. Check your TV owner’s manual for details on correct Sync Mode settings.

Caution:

–Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible video display. If you set Progressive Scan to On in error, you must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds before releasing it.The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog display.

Disc Audio	Off
Disc Subtitle	On
Disc Menu
Rating
Password

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Sound

–Digital Audio Output

Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/ PCM” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).

Stream/PCM: Select “Stream/PCM” if you connected the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.

PCM: Select “PCM” if you connected the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with linear PCM only (or Mini Disc (MD) recorder or Digital Audio Tape (DAT) deck).

Disc Audio	DIGITALDOLBY /PCM
Disc Subtitle	Stream/PCM
Disc Menu	PCM
Rating
Password	Sample Freq.
TV Aspect	48 KHz
Menu Language	96KHz
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others

–Sample Frequency

To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as left.

If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.

–5.1 Speaker settings

Select speaker settings, including volume balance and delay time, or test the speaker settings.

Speaker settings are only active on the Analog Multi- Channel Output. (See appendix, page 24.)

Disc Audio
Disc Subtitle
Disc Subtitle		R			R
Disc Menu
Disc Menu
Rating	Front L
Password	Volume			0 dB
TV Aspect	Size		Large
Menu Language	Delay			0 ms
Progressive Scan	Test
Digital Audio Output	Return
5.1 Speaker Setup

Others

14PREPARATION

DVD953 specifications

The Philips DVD953 is a versatile and feature-rich DVD player that exemplifies the brand's commitment to quality and innovation in home entertainment. Launched during a time when digital media was rapidly gaining ground, the DVD953 was designed to provide users with an enhanced viewing experience, while supporting a variety of disc formats and media types.

One of the standout features of the Philips DVD953 is its capability to play not only standard DVDs but also Video CDs (VCDs), Audio CDs, and even MP3 CDs. This versatility allows users to enjoy a wide range of media without the need for multiple devices. The DVD953 supports various video formats, including PAL and NTSC, ensuring compatibility with television systems around the world.

The player is equipped with progressive scan technology, which significantly enhances video quality by providing a smoother and more detailed picture compared to interlaced video. This feature is particularly beneficial for viewers who appreciate high-definition content, as it reduces flicker and provides a more immersive viewing experience, especially for action-filled sequences or cinematic presentations.

Additionally, the Philips DVD953 includes an HDMI output, providing a digital connection that can result in superior picture and sound quality. The player also supports Dolby Digital sound, ensuring that users enjoy a cinematic audio experience that complements the high-quality visuals.

Another remarkable aspect of the DVD953 is its built-in parental control feature, allowing parents to manage and restrict viewing content based on age ratings. This gives families peace of mind, knowing that inappropriate content can be filtered out easily.

The design of the Philips DVD953 is both sleek and user-friendly, featuring a straightforward interface that allows for easy navigation through menus and settings. The remote control is intuitive, making it simple to operate various functions without hassle.

In summary, the Philips DVD953 stands out in the realm of DVD players for its combination of versatility, cutting-edge technology, and ease of use. It is an ideal choice for anyone looking to enhance their home entertainment system with a reliable and high-performing device that caters to a wide variety of media formats while delivering impressive audio-visual quality.