Philips DVP1120/55 No sound or distorted sound, Remote control does not, Function properly

		Troubleshooting (continued)
Problem		Solution
No sound or distorted sound.	–	Check the audio connections to the connected audio
		device.
	– Make sure that the connected audio device is turned
		on to the correct input source.
	– Set the digital output setting correctly, based on the
		device you connected to this unit. See “Audio Menu –
		Digital Output” for details.
The remote control does not	–	Aim the remote control directly at the sensor on the
function properly.		front of this unit (not towards the TV).
	–	Remove any obstacles between this unit and the
		remote control.
	–	Batteries are weak, replace the batteries.
	–	Check the polarities of the batteries are as indicated
		on the remote control (± signs).

English

The unit does not start playback.

–Insert a readable disc with the playback side facing inwards. The DVD+R/CD-R must be finalized.

–Make sure the disc is not scratched or warped. Check if the disc is defective by trying another disc.

–The disc is of a different region code.

–You may need to enter the password in order to unlock the disc for playback.

–Moisture may have condensed inside this unit. Remove the disc and leave this unit turned on for about an hour.

The buttons on the unit do not – There is a technical problem. Disconnect this unit

work.from the power outlet for 10 seconds and reconnect again.

37

1_dvp1120_55_eng 5_CR3_aftFinal.37 37 2007-08-30 10:10:28 AM