Philips DVP3040K user manual Playing discs, Basic playback controls, Using the Disc Menu

Disc Operations

E n g l i s h

Playing discs

1Connect the power cords of the DVD player and TV (and any optional stereo or AV receiver) to a power outlet.

2Turn on the TV power and set to the correct Video In channel. (See page 15 “Setting up the TV”).

3Press STANDBY-ONto turn on the DVD player.

➜ The DVD background screen appears on the TV.

4Press OPEN/CLOSE 0 on the front of the DVD player.

●You can also hold down the STOP Ç button on the remote control to open and close the disc tray.

5Place a disc into the disc tray with the lable facing up, then press OPEN/CLOSE 0. ➜ For double-sided discs, load the side you want to play facing up.

6Playback may start automatically. If not press PLAY/PAUSE 2; .

➜If a disc menu appears on the TV, see page 20 “Using the Disc Menu”.

➜If the disc is locked by parental control, you must enter your six-digit password. (See page 33).

●For more playback features, see pages 20–25.

Basic playback controls

Unless otherwise stated, all operations described are based on Remote Control use.

Pausing playback

1During playback, press PLAY/PAUSE 2; to pause playback and display a still picture.

➜ Sound will be muted.

2To resume normal playback, press PLAY/PAUSE 2; again.

Selecting track/chapter

●Press PREV J / NEXT K to go to the previous or next track/chapter.

●In STOP mode, press DISPLAY to display the disc information text line for title/chapter/track (example - 00/08).

●Use alphanumeric keypad (0-9) to enter valid title/chapter/track number, then press OK.

➜The playback skips to the selected title/ chapter/track.

Stopping playback

●Press STOP Ç.

Helpful hints:

–Screen saver will start automatically if the disc playback is stopped/paused for 5 minutes.

–The player will automatically switch to Power Standby mode if you do not press any buttons for 15 minutes after the disc has stopped playing.

Operations for video playback (DVD/VCD/SVCD)

Using the Disc Menu

Depending on the disc, a menu may appear on the TV screen once you load in the disc.

To select a playback feature or item

●Use 1 2 3 4 keys or numeric keypad (0-9)on the remote, then press OK to start playback.

To access or remove the menu

●Press DISC MENU on the remote.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.

20

01-41_DVP3040K_93_engRC3 20 02/06/06, 11:25 AM