Connections (continued)
English
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
INT IN | TO TV VIDEO | AUDIO IN | |
| IN | R | L |
CH3 CH4
1
IMPORTANT!
–If your television only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the television. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Using an accessory RF modulator
AUse the composite video cable (yellow) to connect the DVD player’s TV OUT (CVBS) jack to the video input jack on the RF modulator.
BUse the RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on the television.
CTo hear sound of this DVD player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD player to the corresponding AUDIO IN jacks on the RF modulator (cable supplied).
DConnect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
11