DVD Menu Options (continued)
Using the Audio setup menu
APress SETUP on the remote control. The system setup menu appears.
General Audio Video Preference
- - Audio Setup Page - -
Downmix
Digital Audio
BPress W X to select { Audio Setup Page }.
CPress S T to select an item, then press X to access.
Example: { Downmix }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse S T to select a setting and press OK to confirm.
Example: { Stereo }
The setting is selected and setup is complete.
ETo exit, press SETUP.
Downmix
This option allows you to set the stereo analog output of your DVD player.
AIn ‘Audio Setup Page’, press S T to select { Downmix }, then press X.
{Stereo }
Select this option when output delivers sound from only the two front speakers.
{LT/RT }
Select this option if your DVD player is connected to a Dolby Pro Logic decoder.
BUse S T to select a setting and press OK to confirm.
Digital Audio
The options included in Digital Audio are: {Digital Output} and {LPCM Output}.
AIn ‘Audio Setup Page’, press S T to select { Digital Audio }, then press X.
BPress S T to select an item, then press X to access.
CUse S T to select a setting and press OK to confirm.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
29