Tip
•The component video input jacks on the TV may be labeled as Y Pb/Cb Pr/Cr or YUV.
•This type of connection provides good picture quality.
Option 2 : Connect to video (CVBS) jack
VIDEO IN
1Connect a composite video cable (supplied) to the TV OUT jack on this DVD player and the video input jack on the TV.
Tip
•The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
•This type of connection provides standard picture quality.
Connect audio cables
Connect the audio from this DVD player to the TV to allow sound output through the TV.
AUDIO IN
1Connect the audio cables (supplied) to the AUDIO OUT L/R jacks on this DVD player and the audio input jacks on the TV.
Route audio to other devices
Route the audio from this DVD player to other devices to enhance audio play.
Connect to digital amplifi er/receiver
DIGITAL IN
DIGITAL
OUT
COAXIAL 
1Connect a coaxial cable (not supplied) to the COAXIAL/DIGITAL OUT jack on this DVD player and the COAXIAL/DIGITAL input jack on the device.
Tip
•You can optimize the audio output (see chapter ‘Adjust settings’ - [Audio Setup] > [Digital Output]) for details.
Connect to analog stereo system
AUDIO IN
1Connect the audio cables (supplied) to the AUDIO OUT L/R jacks on this DVD player and the audio input jacks on the device.
Connect to power outlet
Warning
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the DVD player.
1 Connect the power cord to the power outlet.
»The DVD player is ready to be set up for use.
English
EN 7