Philips DVP3727X/94 quick start Subwoofer Digital Output, Present, All, Pcm, Off

DVD Menu Options (continued)

Subwoofer Digital Output

This option is only available for subwoofer connection.

AIn ‘Audio’, press ST to select

{Subwoofer }, then press X.

{Present }

Select this option when a subwoofer is connected.

{None }

Select this option when no subwoofer is connected.

BUse ST to select a setting and press OK to confirm.

Select this if you connect to a multichannel decoder/receiver.

AIn ‘Audio’, press ST to select { Digital Output }, then press X.

{All }

Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2).

{PCM }

Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation).

{Off }

To deactivate the digital audio output. For example, if you use the FRONT (L/R) AUDIO OUT sockets to connect to a TV or stereo system.

BUse ST to select a setting and press OK to confirm.

Tips:

–If { Digital Output } is set to { All }, all audio settings except MUTE are invalid.

–If { Digital Output } is set to { All } while playback MPEG, MP3/WMA fi les, the player will output PCM signals.

English

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

33

dvp3126-3727_94_eng.indd 33 2007-09-04 2:29:02 PM