Philips DVP4090, DVP4080 quick start Selecting the colour system that corresponds to your TV

E n g l i s h

Selecting the colour system that corresponds to your TV

This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.

General Audio Video Preference

- - Video Setup Page - -

1Press SETUP.

2Press 2 to select {VIDEO SETUP PAGE}.

3Press 3 4 to highlight {TV TYPE}, then press 2.

4Press 3 4 to highlight one of the options below:

PAL – Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format.

NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format.

Multi – Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

5Select an item and press OK.

➜ Follow the instructions shown on the TV to confirm the selection (if any).

Tips:

–Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Type’ system.

–If there is no proper picture on your TV, wait for 15 seconds for auto recovery.

CHANGING NTSC TO PAL:

1.ENSURE THAT YOUR TV SUPPORTS PAL STANDARD.

2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER.

CONFIRM AGAIN TO USE NEW TV TYPE SETTING.

To reset to default TV colour system manually:

●Wait for 15 seconds for auto recovery.

OR

1Press OPEN/CLOSE on the DVD player to open the disc tray.

2Press numeric keypad ‘3’ on the remote control for few seconds.

➜ The DVD background screen appears on the TV.