Philips DVP522/69 manual Troubleshooting, Problem Solution

Page 28

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

Solution

No power

Check if the AC power cord is properly connected.

 

Press the STANDBY ON on the front of the DVD

 

 

system to turn on the power.

No picture

Refer to your TV’s manual for correct Video In

 

 

channel selection. Change the TV channel until you

 

 

see the DVD screen.

 

– Check if the TV is switched on.

Distorted picture

Sometimes a small amount of picture distortion may

 

 

appear depending on the disc being played back.This

 

 

is not a malfunction.

Completely distorted picture or

Connect DVD Player directly to the TV.

black/white picture with DVD

Make sure the disc is compatible with the DVD

 

 

Player.

 

– Ensure that the DVD Player’s TV Type is set to match

 

 

that of the Disc and your TV.

No sound or distorted sound

Adjust the volume.

 

Ensure to select stereo output on your disc (except

 

 

multichannel).

 

Check that the speakers are connected correctly.

 

Ensure that the DTS disc also supports Dolby Digital

 

 

output.

No audio at digital output

Check the digital connections.

 

Check if your receiver can decode MPEG-2 or DTS

 

 

and if not, please make sure the digital output is set

 

 

to PCM.

 

Check if the audio format of the selected audio

 

 

language matches your receiver capabilities.

Disc can’t be played

The DVD+R/CD-R must be finalized.

 

Ensure the disc label is facing up.

 

Check if the disc is defective by trying another disc.

 

If you have recorded a Picture CD or MP3 CD

 

 

yourself, ensure that your disc contains at least 10

 

 

pictures or 5 MP3 tracks.

 

Region code incorrect.

Picture freezes momentarily

Check the disc for fingerprints/scratches and

during playback

 

clean with a soft cloth wiping from centre to edge.

No return to start-up screen when

Reset the unit by switching the player off, then on

disc is removed

 

again.

 

 

 

28

01-30 DVP522_69

28

8239 300

32141

24/02/2004, 2:10 PM

 

Image 28
Contents DVP522 Laser safety General InformationEnvironmental Information LaserEnglish IndexG l i s h Contents Care and safety information Supplied accessoriesIntroduction Using Composite Video jacks Cvbs Using Component Video jack Y Pb PrNglish Using S-Video jack Using an accessory RF modulatorConnections EnglishConnecting the power cord When no disc is loaded, pressOptional Connecting Digital AV Optional Connecting to anAudio System Receiver Receiver has a PCM, Dolby Digital, or MPEG2 decoderFunctional Overview Front and Rear PanelsRemote Control Inserting batteries into the Remote Control Setting up the TVUsing the Remote Control to operate the Player Getting StartedPress 1 2 to select ‘Video Setup Page’ Selecting the colour system that corresponds to your TVPress System Menu Move to ‘TV Type’ and pressSetting language preference Setting the OSD LanguageSetting the Audio, Subtitle and Disc menu language If you choose Others in Audio, Subtitle or Disc MenuDisc Operations Playable DiscsPlaying discs ALLBasic playback controls Using the Disc MenuPlay B Repeat DVD/SVCD/VCD/CD Repeat A-B DVD/VCD/CDSlow Motion DVD/VCD Forward / Reverse Searching DVD/VCD/CDSpecial disc features Playing MP3/JPEG Picture CDSpecial Jpeg features General Setup System Menu OptionsBasic Operations Program not for Picture CD/MP3Speaker Setup Audio SetupDigital Audio Setup Dolby Digital Setup Equalizer Sound ModeDual Mono DynamicVideo Setup 3D Processing TV DisplayClosed Captions Picture Setting PreferenceSharpness Brightness/ContrastRating explanations Parental cont’dSpecifications Video PerformanceTroubleshooting Problem SolutionTroubleshooting Glossary Language Code Hotline