Philips DVP5100K/13 user manual Audio Setup Menu, Digital Audio Setup, Digital Output, Lpcm Output

Go to Audio Setup Page

Analog Output

This options allows you to set the stereo analog output of your DVD Player.

1 In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {ANALOG OUTPUT}, then press 2.

Stereo

Select this option when output delivers sound from only the two front speakers.

LT/RT

Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

V SURR

Allows the DVD player to use virtual surround sound effects.

2 Press 3 4 to select a setting, then press OK to confirm your selection.

DVD Setup Menu Options

E n g l i s h

	Audio Setup Menu			Digital Audio Setup
1 In disc mode, press SYSTEM MENU.				The options included in Digital Audio
2 Press 1 2 to select ‘Audio Setup’ icon.				Setup are:‘Digital Output’ and ‘LPCM
				Output’.
3 Press OK to confirm.			1 In ‘AUDIO SETUP PAGE’, press 3 4 to
				highlight {DIGITAL AUDIO SETUP}, then
				press 2.
			2 Press the 3 4 keys to highlight an option.
		- - Audio Setup Page - -
		Analog Output	3 Enter its submenu by pressing 2.
		Digital Audio Setup
		Sound Mode	4 Press 3 4 to select a setting, then press
		CD Upsampling
				OK to confirm your selection.
		Night Mode

Digital Output

Set the Digital output according to your optional audio equipment connection. ➜ Off:Turn off the digital output.

➜ All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.

➜ PCM Only: Only if your receiver is not capable of decoding multi-channel audio.

Helpful Hints:

– If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.

➜ 48kHz: Playback a disc recorded at the sampling rate of 48kHz.

➜ 96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic (Flat) mode.

Helpful Hint:

– LPCM Output can be selected only when PCM Only is activated.

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

28

01-41 DVP5100K_13 (Korea) 28 07/01/2005, 05:42