Setup
Note
•[LPCM Output] setting is changeable only when [Digital Output] is set as [PCM Only].
•The higher the sampling rate, the better the sound quality.
[Volume] - Set the default volume level.
[Sound Mode] - Select a preset sound effect.
[Speaker Setup] - Optimize the surround effect for the connected speaker system.
•[Front Speaker], [Center Speaker] and [Rear Speaker]
•Select [Large] when the speakers support the output of low frequency signal (lower than 120 Hz), otherwise select [Small].
•Select [Off] (This option is not available for [Front Speaker]) to mute the speaker(s).
•[Subwoofer] - Mute or unmute the subwoofer.
•[Speakers Volume] - Increase or decrease the volume level of each speaker.
•[Speakers Delay] - Set the delay time for each speaker.
[Night Mode] - Equalize loud sound and soft sound. Enable this feature to watch DVD movies at a low volume at night.
Note
•Applicable to Dolby Digital encoded DVD discs only.
Preference |
|
| |
General | Audio | English | |
Subtitle | Off | ||
| |||
Video | Disc Menu | English | |
Parental Control | 8 Adult | ||
| |||
Audio | PBC | On | |
Password | Change | ||
| |||
Preference | DivX Subtitle | Standard | |
| Version Info |
|
[Audio] - Select an audio language. [Subtitle] - Select a language for subtitle. [Disc Menu] - Select a language for disc menu.
18EN