7 Additional information
Update software
For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website.
Caution
•Power supply must not be interrupted during software upgrade.
1Press SETUP.
2Select [Preferences] > [Version Info], and then press OK.
3Write down the file name, and then press SETUP to exit the menu.
4Visit www.philips.com/support to check for the latest software version, using the file name for this product.
5Refer to the upgrade instructions on the website for more information.
Note
•Disconnect the power cord for a few seconds and connect again to turn on the product.
Care
Caution
•Never use solvents such as benzene, thinner, cleaners available commercially, or
Clean discs
Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement.
Specifications
Note
•Specification and design are subject to change without notice
Video
•Signal system: PAL / NTSC
•Composite video output: 1 Vpp ~ 75 ohm
•Component video output: 0.7 Vpp ~ 75 ohm
Audio
•Analog stereo output
•Signal to noise ratio (1 kHz): > 90 dB
•Dynamic Range (1 kHz): > 80 dB
•Crosstalk (1 kHz): > 80 dB
•Distortion/noise: (1 kHz): > 70 dB
•MPEG MP3: MPEG Audio L3
Main unit
•Dimensions (w x h x d): 360 x 37 x 210 (mm)
•Net Weight: 1.45 kg
Power
•Power supply rating: 110 - 240V, 50/60HZ
•Power consumption: < 10 W
•Power consumption in standby mode: < 1 W Accessories supplied
•Remote control and batteries
•Audio/Video cables
•User Manual
Laser specification
•Type: Semiconductor laser InGaAIP (DVD), AIGaAs (CD)
•Wave length: 655 nm (DVD), 790 nm (CD)
•Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)
•Beam divergence: 60 degrees
8 Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back of your product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this unit do not work.
•Disconnect this product from the power outlet for a few minutes, then connect again.
English
EN 15