Get started | Philips DVP3510/94 instruction

1Connect a composite video cable (supplied) to:

•the TV OUT jack on this product.

•the video input jack on the TV.

2Connect the audio cables (supplied) to:

•the AUDIO OUT L/R jacks on this product.

•the audio input jacks on the TV.

Connect the audio from this product to other devices to enhance sound.

Connect an analogue stereo system

AUDIO IN

4 Get started

1Press and push the battery compartment to slide it open (see “1” in the illustration).

2Insert two AAA batteries with correct polarity (+/-) as indicated.

3Push and slide back the battery compartment (see “3” in the illustration).

English

1Connect the audio cables (supplied) to:

•the AUDIO OUT L/R jacks on this product.

•the audio input jacks on the device.

Caution

•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the product.

•Before connecting the AC power cord, ensure you have completed all other connections.

Note

•The type plate is located on the back of the product.

1 Connect the AC power cable to the wall

socket.

» The product is ready to be set up for use.

Note

•If you are not going to use the remote control for a long time, remove the batteries.

•Do not mix batteries (old and new or carbon and alkaline, etc.).

•Batteries contain chemical substances, so they should be disposed of properly.

Find the TV input channel

1Press to turn on this product.

2Turn on the TV and switch to the video input channel (refer to the TV user manual on how to select the A/V input channel).

1Press SETUP.

» [General Setup] menu is displayed.

2Select [OSD Language], and then press .

3Press to select a language, and then press OK.

EN 7