Turn on Progressive Scan
Connect a progressive scan TV with component video jacks (see chapter ‘Connect video cables - Option 1: Connect to component video jacks’ for details).
1Turn on the TV to the correct viewing channel for this DVD player.
2Press SETUP.
3Press V to select [ Video Setup ].
4Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
Video Setup
| TV System |
|
|
|
|
|
|
|
|
|
| On |
| ||
| TV Display |
|
|
| Off |
| |
| Progressive |
|
|
|
|
|
|
| Picture Setting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7You can now turn on the progressive scan mode on the TV (see the TV user manual).
Note
•During play, when progressive scan mode is on for both this DVD player and the TV, distorted picture may display. Turn off the progressive scan feature on both this DVD player and the TV.
5To proceed, select [ OK ] and press OK. The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.
•If no picture is displayed, turn off the progressive scan mode as follows:
1)Press Z to open the disc compartment.
2)Press the numeric button ‘1’.
6To exit the menu, press SETUP.
14EN