Philips DVP3345VB manuel dutilisation DVD/VCR for more than 5 seconds. Details are on pages 9

Hookups (cont’d) 13

DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible Using

Digital Audio connections

English

	DVD			DVD/VCR	VCR
DIGITAL	AUDIO	S-VIDEO	COMPONENT	AUDIO OUT AUDIO IN
			VIDEO OUT
AUDIO OUT	OUT	OUT	Y	L	L
	L		CB /
				R	R
COAXIAL			PB
	R			VIDEO OUT VIDEO IN
			CR /
			PR
Stereo

2

	1	Video Cable
COAXIAL		(supplied)
DIGITAL
AUDIO IN	Coaxial Digital Audio

Cable (not supplied)

Back of TV

(example only)

VIDEO IN

	Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGITAL AUDIO
	OUT jack and to the Coaxial Digital Audio In jack on the Stereo. This digital audio connection only
1 provides sound for the DVD player of the DVD/VCR. So, in order to use the VCR features, connect the supplied
	red/white audio cable. To connect the red/white audio cable, see step 5 on page 10.
	Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR
	and to the Video In jack on the TV. To use component video cable or S-Video cable instead for the DVD
2 player, see page 11. You will still need the yellow video cable for VCR features.
3	Plug in the power cords of the Stereo, TV and DVD/VCR. Turn on the Stereo and select its Auxiliary
	IN channel. Turn on the TV and set it to the correct Video In channel. Go to your TV’s lowest channel
	(01 or 02) and change channels downward until you see DVD or VCR material on the TV screen.
	To help you find the right Video In channel on the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in
	DVD mode. With no disc in the player, a large DVD Video logo will appear on the TV screen when you get the TV
	on the correct Video In channel.
	Make sure Progressive Scan (PROG. SCAN) is OFF and P.SCAN does not appear on the DVD/VCR’s display panel.
	Disable Progressive Scan either in the DISPLAY Menu or by pressing and holding PLAY B (DVD) on the front of
4	the DVD/VCR for more than 5 seconds. Details are on pages 9 and 52.
	You are ready to turn on the DVD/VCR. Go to page 15 before turning on the DVD/VCR.

Remember...

Some DVDs are recorded in Dolby Digital Multi-channel Surround Sound. Select Dolby Digital Multi-channel Surround Sound in the DVD Disc Menu. If Dolby Digital Surround Sound is not recorded on the disc, you will not have surround sound available.

If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to BITSTREAM in the DVD player’s Setup Menu. Details are on page 53. If the DVD/VCR is not connected to a Dolby Digital-compatible Stereo, set DOLBY DIGITAL to PCM. Incorrect settings may cause noise distortion and damage the speakers.

EN - 13