Philips DVP3320/94 Connect audio cables, Connect USB device, Route audio to other devices

Page 9

Tip

The video input jack on the TV may be labeled as A/V IN,VIDEO IN, COMPOSITE or BASEBAND.

This type of connection provides standard picture quality.

Connect audio cables

AUDIO IN

Connect analogue stereo system

AUDIO IN

FRONT L

FRONT R

1Connect the audio cables (not supplied) to:

the FRONT L/R jacks on this product.

the audio input jacks on the TV.

Connect USB device

Connect the audio from this product to the TV to allow sound output through the TV.

1Connect the audio cables (not supplied) to:

the FRONT L/R jacks on this product.

the audio input jacks on the TV.

Route audio to other devices

Route the audio from this product to other devices to enhance audio play.

Connect to digital ampli er/receiver

DIGITAL IN

DIGITAL

OUT

COAXIAL

1Connect a coaxial cable (not supplied) to:

the COAXIAL jack on this product.

the COAXIAL/DIGITAL input jack on the device.

1Connect a USB ash drive to the jack on this product.

Note

This product can only play/view MP3,WMA, or JPEG les that are stored on a USB ash drive.

Press the button to access the content and play the les.

10EN

Image 9
Contents Register your product and get support at Contents Safety and important notice Disposal of your old product and batteriesAbout Progressive Scan Copyright notice Trademark noticeProduct overview Feature highlightsMain unit Region codesRemote control Zoom the picture in or out VolumeStop play Start, pause or resume disc play Info Connect video cables ConnectOption 1 Connect to component video jacks Option 2 Connect to video Cvbs jackConnect USB device Connect audio cablesRoute audio to other devices Connect analogue stereo systemConnect power Get started Prepare the remote controlFind the correct viewing channel Select menu display languagePress Setup to exit the menu Play a disc PlayPlay video Control video playAccessVCD menu Access DVD menuPreview disc contents Skip play to a speci c timePlay photo Play musicPlay from USB device Control photo playPlay musical slideshow Speed Select a copying speed Bitrate Select a quality level Create MP3 lesSelect Start in the menu, then press OK to start to convert To exit the menu, select Exit, then press OKGeneral setup Adjust settingsAudio setup Off Disable the auto standby modeVideo setup Picture Setting PreferencesTV System Version Info Display the software version of this product DefaultCare Update softwareUSB SpecificationsEnglish Picture TroubleshootingSound PlayAspect ratio GlossaryLanguage Code GSM / WLL