Philips DVP3110K/75 Colour settings, Personal colour, TV System, Digital output, Analog output

Page 14

E n g l i s h

Colour settings

You can select one of five predefined sets of colour settings and one set (Personal) which you can define yourself.

Personal colour

Allows you to fine-tune the selected colour settings saturation, brightness and contrast.

DCC (on Pr/Cr Pb/Cb Y Component Video Out only)

Digital Crystal Clear (DCC) allows you to fine-tune the following parameters on the progressive scan component output.

Gamma - allows you to adjust the intensity of the picture non-linearly. A positive value will allows you to bring out low level detail on dark scene while a negative value will emphasis on contrast.

Sharpness - allows you to adjust sharpness of the picture.

Chroma Delay - is where the Chroma (color) and luma (brightness) signal is out of synchronize.This allows you to adjust the advance delay of the chroma signal to yield a perfectly clear picture.

TV System

Allows you to select between PAL, NTSC and AUTO mode depending on your TV.

Note:

– Refer to “NTSC/PAL Conversion”.

Sound

Digital output

Factory setting: ALL.This means coaxial and optical output is on. If you are not connecting to equipment with a digital input, change the setting to OFF.

If your equipment doesn't include a digital multi-channel decoder, set the digital output to PCM only (Pulse Code Modulation).

Analog output

Select Stereo, Dolby Surround, 3D Sound (TruSurround) or multichannel output to match your system’s playback capability.

Night Mode

Optimizes the dynamics of the sound for low volume playback.

Speaker settings

Allows you to select speaker settings, volume balance and delay time and to test the speaker settings.

Speaker settings are only active on the Analog Multi- Channel Output. (See appendix)

PCM Output

Allows to select PCM digital output between 48kHz and 96kHz. When 48kHz has been selected, 96kHz (if available on disc) PCM data stream will be converted to 48kHz.

Karaoke vocal

Put this setting to ON only when a multi-channel karaoke DVD is being played.The karaoke channels on the disc will then be mixed into a normal stereo sound.

14PREPARATION

Image 14
Contents DVDQ50 Important Note for Users in the UK How to connect a plugImportant Note Mains plugIndex English Français Deutsch Español Italiano PortuguêsLaser safety General InformationContents Introduction Functional Overview Front and Rear PanelsStop Remote ControlNumerical key pad Play BGeneral Notes Connecting to a TVPreparation Connecting to Optional Equipment Digital Multi-channel soundNTSC/PAL Conversion NTSC/PAL SettingsGeneral Explanation General Initial Setup Virgin ModeDisplay on Front Panel OperationPersonal Preferences Menu Bar on TV ScreenTemporary Feedback Field Icons General operationSpeaker settings Colour settingsNight Mode Personal colourLow Power Standby Access ControlBit Rate Indicator Smart Power OFFLoading Discs General FeaturesOperation Playing a DVD Video and VideoRepeat A-B SearchRepeat Time searchAuto Wake-up Timer FTS-VideoPlaying an Audio CD Special DVD FeaturesSpecial Video CD & Svcd Features Shuffle Favorite Track Selection FTS ProgramMoving to another track Repeat track/discAdditional note for MP3 disc Playback Album/TitleMP3 Discs Album/Track/Disc Access Control Parental Control DVD Video only Access ControlAccess Control Child Lock DVD Video and Video CD Changing the 4-digit code Activating/Deactivating Parental ControlCountry If you forget your 4 digit codeBefore Requesting Service Delay times Speaker SettingsChannel settings AppendixSpecifications Optical Readout System