DVD Setup Menu Options
Audio Setup Menu
1In disc mode, press SYSTEM MENU.
2Press 1 2 to select ‘Audio Setup’ icon.
3Press OK to confirm.
- - Audio Setup Page - -
Analog Output
Digital Audio Setup
Sound Mode
CD Upsampling
Night Mode
Go to Audio Setup Page
Analog Output
This options allows you to set the stereo analog output of your DVD Player.
1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {ANALOG OUTPUT}, then press 2.
Stereo
Select this option when output delivers sound from only the two front speakers.
LT/RT
Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual surround sound effects.
2Press 3 4 to select a setting, then press OK to confirm your selection.
Digital Audio Setup
The options included in Digital Audio Setup are:‘Digital Output’ and ‘LPCM Output’.
1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {DIGITAL AUDIO SETUP}, then press 2.
2Press the 3 4 keys to highlight an option.
3Enter its submenu by pressing 2.
4Press 3 4 to select a setting, then press OK to confirm your selection.
Digital Output
Set the Digital output according to your optional audio equipment connection.
➜All: If you have connected your DIGITAL AUDIO OUT to a
➜PCM Only: Only if your receiver is not capable of decoding
Helpful Hints:
–If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.
➜48kHz: Playback a disc recorded at the sampling rate of 48kHz.
➜96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in
Helpful Hint:
–LPCM Output can be selected only when PCM Only is activated.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
28
28 | 3139 246 15761 | |
15/06/05, 4:43 PM |