Philips DVP3005/37 user manual Setting the TV Display Progressive turning on/off

E n

DVD Setup Menu Options

g l i s h

Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.

1In ‘VIDEO SETUP PAGE’, press 34to highlight {TV DISPLAY}, then press 2.

2Press 3 4 to highlight one of the options below:

4:3 PAN SCAN – Select this if you have a normal TV and want both sides of the

picture to be trimmed or formatted to fit your TV screen.

4:3 LETTER BOX – Select this if you have a normal TV. In this case, a wide picture with black

bands on the upper and lower portions of the TV screen will be

displayed.

16:9 – Select this if you have a wide- screen TV.

3Select an item and press OK.

In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player’s Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, the a distorted picture will appear on the TV. For proper progressive scan set up, see page 17.

1In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {PROGRESSIVE}, then press 2.

OFF

To disable Progressive Scan function.

ON

To enable Progressive Scan function.

2Press 3 4 to select a setting, then press OK to confirm your selection.

➜Follow the instructions shown on the TV to confirm the selection (if any).

➜If a distorted picture appears on the TV screen, wait for 15 seconds for auto recovery.