Philips DVDR3460H, DVDR3450H, DVDR3465H Connecting to a VCR or other similar device, Example only

Step 2: Optional Connections (continued)

			OUT			IN
			VIDEO	TV OUT	TV IN	VIDEO
		VHF/UHF	OUT			IN
CABLE	SATELLITE ANTENNA	RF IN
			AUDIO			AUDIO
			L			L
		VHF/UHF	AUDIO
		RF OUT				AUDIO
			R			R

A						D	Back of a VCR
							(Example only)
				VIDEO (CVBS)	OUTPUT
	EXT2	AUX - I/O	EXT1	TO TV - I/O	L
TV-OUT	IN						~
					R
					COAXIAL		MAINS
				S-VIDEO (Y/C)
					AUDIO (DIGITAL AUDIO)

C

B

TV

English

Connecting to a VCR or other similar device

This connection enables you to record from a video tape to the HDD or a recordable DVD and allows the VCR to be used for playback if the recorder is turned off.

IMPORTANT!

Your new recorder can replace the VCR for all your recording needs. Just unplug all the connections to your VCR.

A Connect the existing Antenna/Satellite/ Cable TV signal (or from the Cable Box/ Satellite Receiver, labelled as RF OUT or TO TV) to the ANTENNA-IN socket on the recorder.

B Use another RF coaxial cable to connect the TV-OUT socket on the recorder to the antenna input socket on the TV.

C Use the SCART cable to connect the EXT1 TO TV-I/Oscart socket on the recorder to the corresponding SCART input socket on the TV.

D Use another SCART cable to connect the EXT2 AUX-I/Oscart socket on the recorder to the SCART output socket (or labelled as TV OUT or TO TV) on the VCR.

Helpful Hints:

–Most commercial video cassettes and DVDs are copy-protected and therefore cannot be recorded.

–Connect the recorder directly to the

TV. If there is a VCR or an additional device in between, the picture quality may be poor because of the copy protection system built into the recorder.

TIPS: Refer to the respective connected device’s user manual for other possible connections.

19