Philips DVP3000K/93 user manual Optional Connecting to a Multi- channel Receiver

Connections

Optional: Connecting to a Multi- channel Receiver

AV Receiver	MULTICHANNEL AUDIO IN
	CENTER	REAR	FRONT
	R		R
	L		L
	SUBW.	REAR	FRONT
	CENTER
	AUDIO			DIGITAL
				OUT
	OUT
	SUB-
	WOOFER		REAR	FRONT

Optional: Connecting to an Audio System

STEREO

AUDIO

IN

DIGITAL

CENTER
AUDIO	DIGITAL
	OUT
OUT

VIDEO

SUB-			OUT
WOOFER	REAR	FRONT	CVBS

English

Receiver has a Dolby Digital or DTS decoder

1Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the Audio Out Left and Right jack for Front and Rear speakers to the corresponding input sockets on your Receiver (cable not supplied).

3Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your Receiver (cable not supplied).

4Set the DVD Player’s Analog Output to ‘Multichannel’ to enable playback of DVDs recorded in Multi-channel. (see page 29 “Setting the analogue output”).

Helpful Hint:

–If the subwoofer is equipped with its own amplifier, the Subwoofer connection should be connected directly to the subwoofer.

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect [FRONT (L/R)] jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

11

01-41 DVP3000K_93_RC2 11 26/09/05, 9:53 AM