E n g l i s h
–Colour settings
You can select one of five predefined sets of colour settings and one set (Personal) which you can define yourself.
–Personal colour
Allows you to
–RGB/YUV switching (Video Output)
This setting allows you to toggle the output of the video signal between RGB(on scart) and Y PrCr PbCb (YUV).
Warning:
When the player is set toY PrCr PbCb (YUV), some TV may not properly synchronise with player on the SCART connector.
–TV System
Allows you to select between PAL, NTSC and AUTO mode depending on your TV.
Note:
– Refer to “NTSC/PAL Conversion”.
Sound
–Digital output
Factory setting: ALL.This means coaxial and optical output is on. If you are not connecting to equipment with a digital input, change the setting to OFF.
If your equipment doesn't include a digital
–Analog output
Select Stereo, Dolby Surround, 3D Sound (TruSurround) or multichannel output to match your system’s playback capability.
–Night Mode
Optimizes the dynamics of the sound for low volume playback.
–Speaker settings
Allows you to select speaker settings, volume balance and delay time and to test the speaker settings.
Speaker settings are only active on the Analog Multi- Channel Output. (See appendix)
–PCM Output
Allows to select PCM digital output between 48kHz and 96kHz. When 48kHz has been selected, 96kHz (if available on disc) PCM data stream will be converted to 48kHz.
–Karaoke vocal
Put this setting to ON only when a
14PREPARATION