Digital output, Analog output, Night Mode

E n g l i s h

Sound

–Digital output

Factory setting: ALL.This means that both coaxial and optical outputs are switched on. If you are not connecting equipment with a digital input, change the setting to OFF. If your equipment doesn't include a digital multi-channel decoder, set the digital output to PCM (Pulse Code Modulation).

All

–Analog output

Select Stereo, Dolby Surround, 3D sound (TruSurround) or multi-channel output to match your system’s playback capability.

–Night Mode

Optimizes the dynamics of the sound for low volume playback.

–Speaker settings

Allows you to select speaker settings, volume balance and delay time and to test the speaker settings.

Speaker settings are only active on the Analog Multi- Channel Output. (See appendix)

–Karaoke vocal

Put this setting to ON only when a multi-channel karaoke DVD is being played.The karaoke channels on the disc will then be mixed into a normal stereo sound.

Language

Select the required Menu, Audio and Subtitle language. See ‘Initial Setup’.

Audio language and Subtitle language can also be adapted via the Menu bar on the screen.

Features

–Access Control

Access Control contains the following features:

Child Lock - When Child Lock is set to ON, a 4-digit code needs to be entered in order to playback discs.

Parental control - Allows the conditional presentation of DVDs containing Parental Control information (see ‘Access Control’).

–Status Window

Displays the current status of the player and is displayed with the menu bar. When disc playback is stopped, it is displayed with the ‘Temporary Feedback Field’ in the default screen. See ‘On-Screen Display’ information;

Factory setting is ON. Select OFF to suppress display of the Status Window.

–Bit Rate Indicator

When activated, the bit rate for video, audio as well as total bit rate is displayed.This is only applicable during playback of DVD and SVCD discs.

–Beeper

The beeper can be set to ON or OFF.

14PREPARATION