Philips DVD726v2 owner manual Front Panel

18 Front Panel

STANDBY-ON y Button
Press to turn the DVD
Player on or off (Standby). A	Display Panel
red light will appear on the
	Current Disc details appear
front of the Player when the
	here, including the elapsed
power is off (Standby).
	playing time of a Disc.
	SEARCH, PAUSE, STOP (play is
Disc Tray	stopped), MUTE (ON or OFF),
	OPEN, CLOSE, LOAD, OFF
Insert a Disc here. Load the
	(power is turning off),
Disc with the label facing up
	ROOT(for a DVD Disc menu),
and the shiny side facing
	or Repeat messages also
down. If the Disc is two-
	appear here to indicate the
sided, place the Disc in the
	current status of the Player or
tray with the label of the
	Discs.
side you want to play facing
	To adjust the brightness of the
up. Details are on page 16.
	display panel, set DISPLAY
	DIM. Details are on page 44.

Remote sensor

This sensor receives the commands from the DVD Player’s remote control.When using the DVD Player’s remote control to operate the Player, point the remote here (not toward your TV).

PAUSE 8button

Press during playback to pause play; press again to resume play from the same point.

PLAY 3 button

Press to start playing a Disc.

STOP 7button

Press once to stop Disc playback. Play will resume from the same point the next time you start playback. Details are on page 16.

Or press STOP 7twice to stop Disc playback. Play will resume from the beginning of the Disc the next time you start playback.

You must stop playback by pressing STOP 7twice in order to access PREFERENCE SETUP in the DVD Player’s Setup menu.

OPEN/CLOSE / button

Press to open or close the Disc tray.