1Switch the voltage selector to the local power line voltage.
2Connect the power cord to the AC~MAINS jack on the main unit.
3Connect the power plug to the wall outlet.
AC MAINS ~
Install remote control battery
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•Risk of decreased battery life! Never mix different brands or types of batteries.
•Risk of product damage! When the remote control is not used for long periods, remove the batteries.
For fi
1Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1Open the battery compartment.
2Insert 1 CR2025 battery with correct polarity
3Close the battery compartment.
Set clock
1In standby mode, press and hold CLOCK/DISPLAY to activate the clock setting mode.
»[SET CLOCK] (set clock) is displayed briefl y.Then the hour digits are displayed and begin to blink.
2Press VOL +/- to set the hour.
3Press CLOCK/DISPLAY to confi rm.
»The minute digits are displayed and begin to blink.
4Press VOL +/- to set the minute.
5Press CLOCK/DISPLAY to confi rm.
Turn on
1Press on the main unit.
»The unit switches to the last selected source.
Switch to standby
1Press to switch the unit to standby mode.
»The backlight on the display panel turns off.
»The clock (if set) appears on the display panel.
English
EN 13