Philips DVD701 manual Preparation, General notes, Connecting to a TV, Video connection

DIGITAL AUDIO OUT

PCM/MPEG2/AC3/DTS

S-VIDEO CABLE

DIGITAL AUDIO OUT

PCM/MPEG2/AC3/DTS

A/V CABLE

General notes

-Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings.

Please refer to the manuals of your TV,VCR, Stereo System or other devices as necessary to make the best connections.

-Do not connect your DVD-player via your VCR.The video quality could be distorted by the copy protection system.

-For better sound reproduction, connect the player’s audio out jacks to the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See ‘Connecting to optional equipment’.

Caution: Do not connect the player’s audio out jack to the phono in jack of your audio system.

Connecting to a TV

S-Video connection.

1Connect the S-Video connector on the rear of the player to the corresponding connector on the TV using the S-Video cable (not supplied).

2Connect the audio Left and Right channel sockets on the player rear panel to the corresponding sockets on your TV or stereo system (e.g. AUX, CD, etc.).

Video CVBS connection

1Connect the Video socket on the rear of the player to the corresponding socket on the TV using the cable supplied.

2Connect the audio Left and Right channel sockets on the rear of the player to the corresponding sockets on the TV using the cable supplied. Alternatively, you can use the same cable to connect the audio Left and Right sockets on the rear of the player to the corresponding sockets on your TV or stereo system (e.g. AUX, CD, etc.).