Philips HTP5990K/93 Hdmi Setup, Resolution, 480p, 576p, 720p, 1080i, 1080p, Wide Screen Format

English

Setup Menu Options (continued)

Video Setup Page (underlined options are the factory default settings)

HDMI Setup	It provides the picture settings to enhance the appearance and
	picture quality for disc playback. This feature is only applicable if
	you have connected this unit to a HDMI-compatible TV/device.
	{ Resolution }	–	Select a suitable video resolution that is
			compatible with your TV display
			capability.
			{ Auto }
			It detects and selects the best
			supported video resolution
			automatically.
			{ 480p, 576p, 720p, 1080i, 1080p }
			Manually select a video resolution. ‘p’
	Note:		for progressive and ‘i’ for interlaced.
	– If the selected resolution is not supported by your HDMI/DVI
	TV, a black screen will appear. In this case, wait for 5 seconds for
	auto recovery or use the composite (yellow) video cable to
	connect this unit and your TV. Turn on your TV to the correct
	input channel for the composite video and adjust the resolution
	setting to 480p/576p.
	{ Wide Screen Format }
		–	Select a suitable screen display

{ 4:3 Pillar Box }

Display the 4:3 picture disc on the wide- screen TV without stretching. Black bars will be shown on the both sides of the TV.

{ Super Wide }

Display the 4:3 picture disc on the wide-screen TV with non-linear stretching (center position of the screen is stretched less than the side).

{ Off }

No aspect ratio adjustment is made when this option is selected.

Note: { Super Wide } and

{ 4:3 Pillar Box } is only applicable when this unit’s resolution is set to 720p, 1080i or 1080p.

44