Radio Reception
Tuning to radio stations | RDS |
English
1Press SOURCE on the set repeatedly or TUNER on the remote to select FM tuner source.
2Press and hold TUNING 22/33and release the button.
➜ The radio automatically tunes to a station with sufficient reception.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING 22/ 33 briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio stations in the memory.
Automatic programming
Press ANGLE/PROG on the system for more than three seconds to activate programming.
➜All available stations are programmed.
➜AUTO is displayed and available stations are programmed in order of waveband.
Manual programming
1Tune to your desired station (refer to ÒTuning to radio stationsÓ).
2Press ANGLE/PROG on the system to activate programming.
➜ PROG flashes on the display.
3Press PRESETí/ë to allocate a number from 1 to 20 to this station.
4Press ANGLE/PROG again to confirm the setting.
➜ PROG disappears.
Radio Data System is a service that allows FM stations to show additional information. If
you are receiving a RDS station, 
and the station name are displayed.
Scrolling through different RDS information
●Press DISPLAY/RDS on the remote control briefly and repeatedly to scroll through the following information (if available):
ÐStation name
ÐRDS clock
ÐProgramme type such as NEWS, SPORT, POP M ...
ÐFrequency
Setting the RDS clock
Some RDS radio station may be transmitting a real clock time at an interval of every minute. It is possible to set the clock by using a time signal which is broadcast together with the RDS signal.
1Tune to a RDS station from FM band (refer to ÒTuning to radio stationsÓ).
2Press DISPLAY/RDS on the remote control.
➜"RDS 00: OO" appears..
➜If the RDS station does not transmit RDS time, "RDS CLOCK" appears.
Note:
–Some RDS radio station may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS radio station.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press PRESETí/ë until the desired preset station is displayed.
31