Philips MCD289/79 quick start Setting the clock, Setting DVD menu options

Page 3

Setting the clock

1

In standby mode, press and hold CLOCK on the remote control.

2

When the hour digits flash, press VOLUME-/+(VOL+/- on the remote control) to set the hours.

3

Press CLOCK again and the minute digits flash.Then press VOLUME-/+(VOL+/- on the remote) to set the minutes.

4

Press CLOCK again to confirm the time setting.

Setting DVD menu options

IMPORTANT!

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.

 

STANDBY-ON

ANALOG AUDIO SETUP

SLOW

DIGITAL AUDIO SETUP

 

 

PICTURE SETTING

3D

 

DIVX (R) VOD

 

 

ANGLE

 

DISPLAY

 

MUTE

Tip

See chapters "Preparations" and "System

Menu Options" in the User Manual for

detailed descriptions.

RDS

Image 3
Contents What’s in the Box? Quick Start GuideTips Setting up the TVSetting DVD menu options Setting the clockProgramming and tuning to radio stations Playing a discPlaying a USB mass storage device