Philips dvp7400, DVP7400S/93 user manual Channels, Subwoofer, Speakers Volume, Speakers Delay

English

Getting Started (continued)

			[LARGE]
Step 5 : Setting the speakers’			Select when the connected speakers can
channels			produce low frequency signals below
			120Hz.
You can adjust the delay time (for center			[SMALL]
			Select when connected speakers cannot
and rear only) and volume level for
			product low frequency signals below
individual speakers. These adjustments let
			120Hz.
you optimize the sound according to
your surroundings and setup.			{ SUBWOOFER }
Important!			[ON]
			Select when a subwoofer is connected.
Speaker settings are available for
			[OFF]
multi-channel outpus.
			Select when no subwoofer is connected.
			{ SPEAKERS VOLUME }
	AUDIO SETUP PAGE		Volume level setting for individual
	ANALOG OUTPUT		speakers (-6dB ~ +6dB).
	DIGITAL AUDIO
	HDMI AUDIO
	SPEAKER SETUP		SPEAKERS VOLUME SETUP
	CD UPSAMPLING
	NIGHT MODE		FRONT LEFT	0dB
	LIP SYNC		FRONT RIGHT	0dB
			CENTER	0dB
			SUBWOOFER	0dB
	SPEAKER SETUP		REAR LEFT	0dB
	FRONT SPEAKER	LARGE	REAR RIGHT	0dB
	CENTER SPEAKER	SMALL
	REAR SPEAKER

SUBWOOFER { SPEAKERS DELAY }

SPEAKERS VOLUME

SPEAKERS DELAY

APress SYSTEM MENU.

BPress X repeatedly to select { Audio Setup Page }.

Delay time settings in relation to the listening position or distance for center and rear speakers (0MS ~ 15MS).

SPEAKERS DELAY SETUP

CPress S T to select { Speaker Setup }, then press X.

DEnter a submenu by pressing X.

EUse S T to select one of the options below:

{ FRONT SPEAKER, CENTER SPEAKER, REAR SPEAKER }

CENTER	0 MS
REAR LEFT	0 MS
REAR RIGHT	0 MS

FPress W X to adjust the setting that best suits your surround sound needs.

GPress OK to confirm.

[OFF] (only for Center and Rear speakers)

Select when no speakers are connected.

Tips:

–Use a longer delay time setting when the rear speakers are closer to the listener than the front speakers.

–A test tone will be automatically generated to help you judge the sound level of each speaker.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.

22

01-49 dvp7400_93_eng2.indd 22 2006-10-12 2:17:06 PM