Philips DVD501AT warranty Playing a Disc, Playing a DVD or an Audio CD, Before you begin

Page 18

18 Playing a Disc

DVD AUDIO CD

Playing a DVD or an Audio CD

Before you begin...

Turn on the power of the TV, amplifier and any other equipment connected to the DVD Player. Make sure the TV and the stereo or amplifier (if applicable) are set to the correct channel. Details are on pages 8-12.

1

Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the display panel.

3Insert a Disc.

1

TITLEPOWER

 

OPEN/

2

MENU

CLOSERETURN

 

ENTER

 

STOP

5

2

Press the OPEN/CLOSE button to open the Disc tray.

3

Place a Disc into the tray. Make sure the Disc is sitting prop- erly in the correct recess.

REV

4

1

4

7

CLEAR

SETUP

PLAY

FWD

2 3

5 6

8 9

0+10

MODE DISPLAY

Some DVDs are recorded on both sides. Make sure the side you want to play is facing up. Or, if the DVD is recorded on only one side, place the Disc in the tray with the label facing up.

4

Press the PLAY button. The tray will close automatically, and playback will begin at the first Chapter or Track of the Disc. Or, you may press the OPEN/CLOSE button to close the tray, and DVD playback will start automatically. (You also may close the tray by gently pressing the Disc tray toward the DVD Player.)

If the DVD in the tray has a menu, the menu may appear on the screen instead. Details are on page 19.

With some Audio CDs, playback will not begin until you press the PLAY button.

5

Press the STOP button to stop playback.

Remember, this DVD Player will play only certain Discs.

See page six for details.

 

PAUSE/STILL

REPEAT

SKIP

SEARCH MODE

A-B

AUDIO

SUB TITLE

ANGLE

Helpful Hints

•A “No Feature” symbol may appear at the bottom right of the TV screen. This symbol means either the feature you tried is not available on the Disc, or the DVD Player can not access the feature at this time. This does not indicate a problem with the DVD Player.

•If a Disc is dirty or has scratches, the pictures may appear distorted and playback may stop. In such cases, remove the Disc and turn off the DVD Player. Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the DVD Player again and reinsert the Disc for play- back.

•When the DVD or CD light appears on the display panel, the Disc is loaded completely and is ready for playback.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DVD501AT Warranty Verification For Customer UseSafety Information Table of Contents Introduction Region Codes Playable DiscsPlayable Discs Color SystemsUsing the Remote Control Remote Control SetupPutting Batteries in the Remote Control Recycling Guidelines/Battery SafetyHookups DVD PlayerHookups cont’d DVD PlayerConnecting to a TV and a Stereo Connecting to a Dolby Digital Decoder or DTS Decoder Back of TV Example only DVD Player Display DVD Player DisplayDisplay Messages Disc loading trayFront Panel AC Power Cord Audio OUT Jacks Rear PanelCoaxial Jack Remote Control Buttons Title ButtonReturn Button Subtitle ButtonBefore you begin Playing a DiscPlaying a DVD or an Audio CD Press the OPEN/CLOSE button to open the Disc trayUsing the DVD Menus Using the Title MenuMemory On Pausing PlaybackWhere playback stopped Resuming playback from the pointStep by Step Playback Fast Forward/Reverse Search Press the Play button to return to normal playbackSlow Motion Press the PAUSE/STILL button during playbackTrack Playback Starting Playback at a Specific TrackWhen playback is stopped, press the Number buttons to Title/Chapter PlaybackStarting Playback at a Specific Title/Chapter Press the Search Mode button repeatedly three times Specific Time PlaybackStarting Playback at a Specific Disc Time Repeat Playback 42-4 B Repeat PlaybackProgrammed Playback Random Playback While the Random screen appears, press the Play butSound Mode DVD LanguageSubtitle Language Subtitle menu will disappear after about 15 secondsCamera Angles Parental Lock Password While playback is stopped, press the Setup button.Press the Number buttons to enter the 4-digit password Press the Number buttons to enter your 4-digit password Parental Lock LevelsPress the Number 1 button to select Level Accessing the Status Display Status DisplayVideo Settings Press the Number 2 button to select VideoPress the Number 3 button to select Audio Audio SettingsGo to to change these settings Press the corresponding Number button to select anAudio Settings cont’d Language Settings Press the Number 1 button to select LanguageLanguage Settings cont’d Press a Number button to select a settingLanguage Settings cont’d Language Country CodeOther Menu Settings Press the Number 5 button to select OthersHelpful Hints Helpful Hints cont’d Cleaning a Disc Care and MaintenanceCleaning the DVD Player Checking the LaserGlossary Specifications Limited Warranty DVD PlayerIndex 38-39Page Supplied Accessories
Top Page Image Contents