Philips DVD 729, DVD 728 owner manual General Information, Laser safety

General Information

Since it is usual for DVD movies to be released at different times in different regions of the world, all Players have region codes and discs can have an optional region code. If you load a disc of a different region code to your Player, you will see the region code notice on the screen.The disc will not playback, and should be unloaded.

2ALL

Laser safety

This unit employs a laser. Due to the risk of eye injury, only a qualified service person should remove the cover or attempt to service this device.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

CAUTION

(WARNING LOCATION: ON THE BACKPLATE OF THE SET)

NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.

The DVD VIDEO Player is in conformity with the EMC directive and low-voltage directive.

For Customer Use:

Read carefully the information located at the bottom of your DVD VIDEO Player and enter below the Serial No.Retain this information for future reference.

Model No. DVD VIDEO 729/728

Serial No. __________________________

NOTE:

PICTURES SHOWN MAY BE DIFFERENT BETWEEN COUNTRIES.

LASER
Type	Semiconductor laser GaAlAs
Wave length		650 nm (DVD)
		780 nm (VCD/CD)
Output Power		7 mW (DVD)
		10 mW (VCD/CD)
Beam divergence		60 degree

Important Note:

Due to the numerous versions of new CD- Audio copy protection or enhanced CD- Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD- Audio discs, kindly refer them to your CD- Audio disc retailer.

CLASS 1

LASER PRODUCT

01-29 DVD728 Eng	4	3139 246 12921
		18/03/2003, 4:50 PM