Philips MCD183 Connect TV, Connect video cables, Option 1 Connect through component video

Page 12

Tip

•For optimal reception, fully extend and adjust the position of the antenna.

•For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL jack.

•The unit does not support MW radio reception.

1 Connect the supplied FM wire antenna to the FM AERIAL socket on the unit.

Connect TV

Connect video cables

With this connection, you can watch video from the unit on the TV screen.

You can select the best video connection that your TV supports.

•Option 1: connect through component video (for a standard TV or Progressive Scan TV).

•Option 2: connect through S-Video (for a standard TV).

•Option 3: connect through composite video (CVBS) (for a standard TV).

Option 1: Connect through component video

Connect a progressive scan TV through component video for higher quality video.

TV

Pr/Cr Pb/Cb Y

COMPONENTVIDEO IN PUT

			Note
				English
	•	The progressive scan video quality is only available		English
	•	The progressive scan video quality is only available
		when a progressive scan TV is connected.
	• If your TV does not support progressive scan, you
		cannot view the picture.
	• For how to activate progressive scan on your TV, refer
		to the TV user manual.

Connect a progressive scan TV through component video for higher quality video.

1Connect component video cables (red/ blue/green - not supplied) to:

•the VIDEO OUT (Pr/Cr Pb/CbY) sockets on this unit.

•the component input sockets on the TV.

Option 2: Connect through S-Video

TV

S-VIDEO IN

1Connect an S-video cable (not supplied) to:

•the S-Video socket on this unit.

•the S-Video socket on the TV.

EN 13

Image 12

Contents =+7 Register your product and get support atContents Adjust volume level and sound effect Mute sound Listen through headphoneSafety Important Safety InstructionsHearing safety Be careful not to adjust the volume as your hearing adaptsThis apparatus includes this label Introduction What’s in the boxYou can play DVD discs with the following region codes Asia Paciﬁ c,Taiwan, Korea Australia, New ZealandOverview of the main unit K jOverview of the remote control For video discs with playback controlPBC turn on/off PBC Connect Place the unitConnect speakers and subwoofer Connect FM antennaConnect TV Connect video cablesOption 1 Connect through component video Option 2 Connect through S-VideoConnect power Option 3 Connect through composite videoConnect audio cables Prepare the remote control Get startedSet clock Turn onTurn on the progressive scan mode on the TV Select the correct TV systemChange system menu language Turn on Progressive ScanPlay Play a discUse the disc menu Select an audio languagePlay from USB Play DivX videoPlay MP3/WMA/picture ﬁ les Insert the USB devicePlay control Play optionsPicture view options Adjust settings General setupAudio setup Display the DivX registration codeVideo setup Preference setupTV Mode Change Tune to a preset radio station Press / to select a preset number that you wantProgram radio stations automatically Program radio stations manuallyAdjust volume level and sound effect Adjust volume levelSelect a sound effect Mute soundOther features Record to a digital recorder For audio players with headphone socketsSpeciﬁ cations Supported disc formats USB playability informationTroubleshooting Black and white or distorted pictureSwitch on the timer. Clock/timer setting erased