Philips DVD-612/022 manual NTSC/PAL Settings, NTSC/PAL Conversion DVD622, General Explanation

Page 10

E n g l i s h

Note:

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

To see the selected audio format of the current DVD in the Status Window, press SYSTEM MENU or Audio.

NTSC/PAL Settings

You can switch the NTSC/PAL setting of the DVD player to match the video signal of your TV.This setting only affects the television’s on-screen display that shows the stop and setup modes.You may select either NTSC or PAL.To change the DVD player setting to PAL or NTSC, follow the steps below.

1Unplug the DVD player from the mains.

2Press and hold 9 and T, on the front of the DVD player. While holding 9 and T, plug in the mains.

3After PAL or NTSC appears on the display panel of the DVD player, release 9 and T, at the same time.The PAL or NTSC that appears on the display panel indicates the current setting.

4To change the setting, press T, within three seconds.The new setting (PAL or NTSC) will appear on the display panel.

NTSC/PAL Conversion (DVD622

only)

This player is equipt. with NTSC/PAL conversion feature to convert the video output of the disc to match with your TV system.The conversion supported are as per below.

 

 

 

 

 

 

 

 

 

 

Disc

Output format

 

 

Type

 

Format

Selected mode

 

 

 

 

 

NTSC

PAL

AUTO

 

 

DVD

 

NTSC

NTSC

PAL

NTSC

 

 

 

 

 

 

 

 

 

 

 

 

PAL

Not

PAL

PAL

 

 

 

 

Supported

 

 

 

 

 

 

 

 

 

VCD

 

NTSC

NTSC

PAL

NTSC

 

 

 

 

 

 

 

 

 

 

 

 

PAL

NTSC

PAL

PAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1In the Preference Menu, select TV System.

2Press 3 or 4 to select PAL, NTSC or AUTO. Notes:

AUTO can only be selected when using a TV that has both the NTSC and PAL systems.

This is applicable for CVBS output on cinch and SCART only

Slight picture distortions may occur due to this conversion. This is normal.Thus, the AUTO format is most suitable for the best picture quality.

General Explanation

About this manual

This manual gives the basic instructions for operating the DVD player. Some DVDs require specific operation or allow only limited operation during playback which may not respond to all operating commands.When this occurs, the symbol Ä appears on the TV screen, indicating that the operation is not permitted by the player or the disc.

Remote control operation

Unless stated, all operations can be carried out with the remote control. Always point the remote control directly at the player, making sure there are no obstructions in the path of the infrared beam.

Corresponding keys on the front panel of the player can also be used.

Menu bar operation

A number of operations can be carried out via the menu bar on the screen.The menu bar can be accessed by pressing the cursor keys on the remote control.

Pressing SYSTEM MENU while the menu bar is displayed will clear the menu bar from the screen.

The selected item will be highlighted and the appropriate cursor keys to operate will be displayed below the icon.

< or > indicates that more items are available at the left/ right of the menu bar. Press 1 or 2 to select these items.

10PREPARATION

Image 10
Contents DVD Important Note for Users in the UK How to connect a plugImportant Note Mains plugIndex English Français Deutsch Español Italiano PortuguêsRegion code for this set is Laser safetyGeneral Information Model No. DVD-VIDEO Serial NoContents Introduction Functional Overview Front and Rear PanelsPause StopPlay B Numerical key padPreparation Connecting to a TVConnecting to Optional Equipment General NotesNTSC/PAL Conversion DVD622 NTSC/PAL SettingsGeneral Explanation General Initial Setup Virgin ModeMenu Bar/Status Window OperationPersonal Preferences Temporary Feedback FieldIcons General operationBit Rate Indicator Night ModeAccess Control Low Power StandbyLoading Discs General featuresOperation Playing a DVD-video and Video CD discRepeat A-B SearchRepeat ShuffleSpecial DVD features Playing an audio CD Special VCD & Svcd featuresFTS Programme Album/Title MP3 Disc Features DVD622 onlyStoring an FTS Programme MP3 Discs Album/Track/DiscAccess Control Child Lock DVD-Video and Video CD Access ControlAccess control Parental Control DVD-Video only Changing the 4-digit code Activating/Deactivating Parental ControlCountry If you forget your 4 digit codeBefore Requesting Service Specification Optical Readout System