Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.
English
Problem
No power.
No picture.
Distorted or poor picture.
Completely distorted picture or black/ white picture.
Solution
✔Check if the AC power cord is properly connected.
✔Press STANDBY ONB on the DVD System or source buttons on the remote to turn on the power.
✔Check if the TV is switched on.
✔Check the video connection.
✔Press SOURCE on the DVD player repeatedly to select ÒDVDÓ or press DISC on the remote.
✔Set your TV to the correct Video In channel.This channel is usually near channel 00. Or, you may have a button on the TV remote control that selects Auxiliary or A/V IN channel. See your TV ownerÕs manual for details. Or, change channels at the TV until you see DVD screen on the TV.
✔If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see ÒGetting
1)Turn off your TV progressive scan mode or turn on to interlaced mode.
2)Select ÒOFFÓ in PROGRESSIVE menu of system setup menu to turn off progressive, then press SYSTEM MENU to exit the menu.
✔Sometimes a small amount of picture distortion may appear.This is not a malfunction.
✔Clean the disc.
✔TV has a colour system standard. If the discÕs or DVD systemÕs colour system is different than your TVÕs colour system, the picture may be distorted or colourless.
35