Wakinguptomusic
— Wake-up Timer
You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”).
9 2 3,4,5,6,8
0 ) | ¹ |
¤ á¸
TIMER SELECT | 7 |
|
1 Prepare the music source you want to play.
•CD: Insert a CD. To start from a specific track, make a program (see “Programming the CD tracks”).
•Tape: Insert an tape with the side you want to play facing forward.
•Radio: Tune in the preset station you
want (see “Step 3: Presetting radio stations”).
2 Press CLOCK TIMER SET.
“SET (DAILY 1)” appears.
3 Turn jog dial to select DAILY 1 or 2, then press ENTER/NEXT.
“ON” appears and the hour digits flash in the display.
1
VOLUME
4 Set the time to start playback.
Turn jog dial to set the hour, then press
ENTER/NEXT.
The minute indication starts flashing.
1
VOLUME
Turn jog dial to set the minute, then press ENTER/NEXT.
The hour indication flashes again.
5 Set the time to stop playback following the above procedure.
6 Turn jog dial until the music source you want appears.
The indications change as follows: TUNER nCD PLAY nTAPE PLAY
7 Adjust the volume.
8 Press ENTER/NEXT.
The start time, followed by the stop time and the music source, appears, then the original display appears.
9 Turn off the power
continued
35