DVD Setup Menu Options (continued)
English
Accessing Video Setup Page
1Press DISC and followed by SETUP on the remote.
2Use 1 2 keys to select ‘Video Setup Page’.
3Press OK to confirm.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
TV Type
This menu contains the options for selecting the colour system that matches the connected TV. For details, see page 19.
TV Display
This menu contains the options for setting the aspect ratio of the DVD system according to the connected TV. For details, see page 19.
Progressive function - turning on/off
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD system’s Y Pb Pr sockets to your TV that supports the progressive video input. Otherwise, the image may not appear or will be distorted. For proper progressive scan set up, see page 18.
1In ‘Video Setup Page’, use 34 keys to highlight { Progressive }, then press 2.
{Off }
Select this to disable progressive scan function.
{On }
Select this to enable progressive scan function.
2Use 34 keys to select a setting and press OK to confirm.
➜Follow the instructions shown on the TV to confirm the selection (if any).
➜If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
34
34 | 14/04/2005, 10:39 AM |