Troubleshooting (continued)
Problem (Playback) | Solution |
English
The DVD system does not start playback.
The aspect ratio of the screen cannot be changed even though you have set the TV display.
Cannot activate some features such as Angles, Subtitles, or
Not able to select some items in the setup/system menu.
Unable to play DivX movies.
Radio reception is poor.
The DVD system does not work.
–Insert a readable disc with the playback side facing down. The
–Check the disc type, colour system (PAL or NTSC) and region code.
–Check for any scratches or smudges on the disc.
–Press SETUP to turn off the system setup menu screen.
–You may need to enter the password in order to unlock the disc for playback.
–Moisture may have condensed inside the system. Remove the disc and leave the system turned on for about an hour.
–The aspect ratio is fi xed on the DVD disc.
–Depending on the TV, it may not be possible to change the aspect ratio.
–The features may not be available on the DVD.
–Changing the language for the sound or subtitle is prohibited on this DVD.
–Press STOP button twice before selecting the system setup menu.
–Depending on the disc availability, some menu items cannot be selected.
–Check that the DivX fi le is encoded in ‘Home Theatre’ mode with DivX certifi ed encoder.
–If the signal is too weak, adjust the antenna or connect an external antenna for better reception.
–Increase the distance between the system and your TV or VCR.
–Tune in to the correct frequency.
–Place the antenna further away from any equipment that may be causing the interference.
–Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual.
45