Playing a disc
1
Press DISC 1 ç / DISC 2 çon the remote to open the disc tray and load in a disc, then press the same button again to close the disc tray.
➜Make sure the label side of the disc is facing you.
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press STOP9 (9 on the remote).
Programming and tuning to radio stations
1
Press SOURCE (or TUNER on the remote control) to select tuner source.
2
Press PROGRAM on the remote control for more than two seconds to program all available stations in order of waveband.
3
Press ¡ / ™ (or 1 / 2 on the remote control) until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the accompany owner's manual.
Notes for remote control:
–First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example).
–Then select the desired function ( 2;, í, ë for example).
CRoyal Philips Electronics N.V. 2007 All rights reserved.
http://www.philips.com