Philips HTS3000/55 user manual Troubleshooting, Problem General Solution

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Never open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair.

If you are unable to solve a problem by following these instructions, consult your dealer or Philips for help.

Problem (General)		Solution
No power.	–	Press STANDBY-ON on the unit to turn on the
		power.
	–	Make sure the mains cord is properly connected and
		the AC outlet has power.
No picture.	–	Refer to your TVs manual for correct Video In
		channel selection. Change the TV channel until you
		see the DVD screen.
	–	Press DISC to select disc mode.
Completely distorted picture	–	Check the video connection.
or black/white picture.	–	Sometimes a small amount of picture distortion may
		appear. This is not a malfunction.
	–	The disc is dirty. Clean the disc.
No sound or distorted sound.	–	Adjust the volume.
	–	Check the speaker connections and settings.
	– Make sure that the audio cables are connected and
		press SOURCE to select the correct input source (for
		example, TV or AUX) to choose the device that you
		want to hear through this unit.
No surround sound effect	–	Press SURROUND to select a correct surround
from the speakers.		sound setting.
	–	Make sure that the source you are playing is recorded
		or broadcast in surround sound (Dolby Digital, etc).
The remote control does not	–	Select the source you want to play (for example,
function properly.		DISC or RADIO) before pressing the function button
		( , í/ ë).
	–	Reduce the distance between the remote control and
		this unit.
	–	Batteries are weak, replace the batteries.
	– Point the remote control directly toward the IR sensor.

42