Philips MCD715/93 quick start Setting the clock, Setting DVD menu options

Setting the clock

1

In standby mode, press and hold CLOCK/RDS on the remote control.

2

When the hour digits flash, turn VOLUME-/+on the system or press VOL+/- on the remote control to set the hours.

3

Press CLOCK/RDS again and the minute digits flash.Then turn VOLUME-/+on the system or press VOL+/- on the remote control to set the minutes.

4

Press CLOCK/RDS again to confirm the time setting.

Setting DVD menu options

IMPORTANT!

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press SYSTEM MENU on the remote control to exit the system menu and then DISC and “1” to exit progressive scan.

QUALITY

Tip

See chapters "Getting Started" and "System Menu Options" in the

User Manual for detailed descriptions.