Playing a disc
1
Press OPEN •CLOSEç (ç on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray.
2
Load in a disc with the label side facing up.
3
Playback will start automatically. If not pressÉÅ.
4
To stop playback, press
Programming and tuning to radio stations
1
Press SOURCE (TUNER on the remote) to select tuner source.
2
Press PROG on the remote for more than two seconds to program all available stations in order of waveband.
3
Press PRESET+/- (CH +/- (¡ / ™) on the remote) until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the accompany owner's manual.
Notes for remote control:
–First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example).
–Then select the desired function ( 2;, í, ë for example).
2005 C Koninklijke Philips Electronics N.V.
All rights reserved.
http://www.philips.com |