Getting Started
English
Step 3: Setting language preference
You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the discÕs default language will be used instead.The OSD language in the system menu will remain once selected.
Setting the OSD Language
1Press SYSTEM.
2Press 1 2 to select ÒGeneral Setup PageÓ.
3Use 1 2 3 4 on the remote to navigate in the menu.
Move to ÒOSD LangÓ and press 2.
4Select a language and press OK.
To exit from the menu
●Press SYSTEM again.
Setting the Audio, Subtitle and Disc
Menu language
1Press SYSTEM in stop mode.
2Press 1 2 to select ÒPreference PageÓ.
3Press 3 4 to highlight the following in the Preference Page.
ÐÒAudioÓ (discÕs soundtrack)
ÐÒSubtitleÓ (discÕs subtitles)
ÐÒDisc MenuÓ (discÕs menu)
4Enter its submenu by pressing 2.
5Select a language and press OK.
6Repeat steps 3~5 for other language settings.
To exit from the menu
●Press SYSTEM again.
52