Philips MCD735/93 Connections, Placing the speakers Subwoofer, Connecting speakers and subwoofer

Connections

English

IMPORTANT!

–The type plate is located at the bottom of the system.

–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.

–Never make or change any connections with the power switched on.

Step 1: Placing the speakers and

		subwoofer
		Center speaker and
		DVD system
				Front speaker
Front speaker			2
	(Left)			(Right)
	1
					1

3	4	3
Surround	Subwoofer	Surround
Speaker (Left)		Speaker (Right)

For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position.

1Place the front left and right speakers at equal distances from the TV and at an angle of

approximately 45 degrees from the listening position.

2Place the center speaker above the TV or the

DVD system so that the center channel's sound is localized.

3Place the rear speakers at normal listening ear level facing each other or hang on the wall.

4Place the subwoofer on the floor near the TV.

Notes:

–To avoid magnetic interference, do not position the front speakers too close to your TV.

–Allow adequate ventilation around the DVD system.

Step 2: Connecting speakers and subwoofer

1Connect the supplied front, rear and center speakers using the fixed speaker cables by matching the colors of the jacks and speaker

cable connectors.

2Connect the passive subwoofer to the WOOFER (8Ω) terminal with the supplied subwoofer cable by matching the plug types.

Note:

– Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

Step 3: Connecting the control cable

Connect the serial port marked “CONTROL CABLE” at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied flat control cable.

8